Complete Step-by-step Guide for Installing a New Shower Unit

Go Services

What are your thoughts on How to Build a Shower Enclosure for Your DIY Bathroom?

An effective shower installation needs cautious preparation and also a great deal of work. In most cases, you will certainly need to do 3 kinds of tasks: framing wall surfaces, setting up the plumbing, and completing walls.

Different Types of Shower Units

Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower system can be attached to the bathroom faucet as per your demand, and also the water temperature level can be readjusted by means of the taps. Push-on mixers are cheap and also very basic to set up. Nevertheless, although the hose connection is simple, it is conveniently displaced. In addition, it is inconvenient to readjust the temperature level.

Bath/Shower Mixer: The hose and spray of this type of shower are incorporated with a bath mixer tap, and also the temperature can be adjusted via the bath faucets. It is a really inexpensive option and no added plumbing is entailed. Nevertheless, the bath/shower mixers additionally deal with inconvenient temperature level control choices.

Guidebook Mixer: The hose and spray of a hand-operated mixer shower system belong of the wall surface unit as well as the cold and hot water supplies are connected to a solitary valve The temperature and also pressure of the water are controlled with either one or a range of knobs (in a lot more pricey showers). Although temperature level control is much easier in manual mixer kinds, they are much more costly than the previously stated mixers. They also need additional plumbing of hot and cold water pipes.

Thermostatic Mixer: The hose and spray of this shower type are a part of the wall unit and also the hot and cold water supplies are attached to a solitary shutoff here as well. It is full with a built-in stabiliser to self-adjust the water temperature and also to prevent it from ending up being as well warm. One of the most significant benefits of a thermostatic mixer shower kind consists of practical temperature control. Nevertheless, it is one of the most pricey of the various mixer alternatives.

Power Shower: A power shower is a solitary unit containing an effective electrical pump that can changing both the water pressure and also temperature level. This sort of shower can be fitted if there is supply of water from a cold water cistern and a hot water cyndrical tube. A power shower makes the change of both pressure and also temperature easy. On the other hand, it disagrees for water heated directly by the shower or where the water is provided by a combination central heating boiler under keys pressure.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply and it heats the water electrically. It is necessary to keep in mind that for this shower type to be set up, the mains stress needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The unit permits the temperature as well as pressure to be readjusted via a knob. Designs with temperature level stabilisers are better as they remain untouched by various other taps elsewhere being used within the family. A major disadvantage of electric showers is that the control handle just permits the option of high temperatures at less stress, or lower temperatures at a higher pressure. This is bothersome in the winter when the spray is often weak and the mains water is cooler. Nevertheless, this problem is dealt with in some models which are readily available with a winter/summer setup.

Many Usual Blunders

Breaking or ignoring neighborhood code constraints.

Using pipes that are also small.

Attaching copper to galvanized without utilizing a brass or dielectric fitting between the two.

Not utilizing tape or pipe compound at threaded joints.

Not leveling your components when installing them.

Not installing an air void loading for fixtures.

Reducing supply stub outs as well brief to install the shutoff valves onto after the ended up wall remains in location.

Not properly lining up tubing right into installations or quit shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will cause a leakage.).

When turning the water back on in your home, always run the outside hose valve or purge your commodes to bleed dust and also air from the lines. This particles can trigger issues in your sink faucets and various other plumbing trim.

Preparation.

To start with, you have to decide on the kind of shower that you wish to set up. It is necessary to ascertain whether the selected shower can handling particular systems as well as can control a safe level of water through the central heating boiler. Many shower systems nowadays are made to be flexible to various water stress (such as stored hot water and chilly mains).
It is also vital to take into consideration the water pressure and the preparation of the piping and drain for the shower.

Technique.

Depending upon the type of shower you want to mount, the shower head need to either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it needs to have a check valve.
Prior to starting, it is advisable to mark the positions of the shower head and also control, as well as to plan the pipe-work involved. Additionally, the water drainage system to remove the waste water will need to be intended. Both placements of the wire route as well as the shower button will certainly likewise require to be taken into consideration if a rapid or electrical shower device is being installed.
Make use of the direction guide supplied with the shower unit to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is very important to cut off the supply of water. In order to protect the pipelines, they ought to be offered a water resistant covering and also fitted with isolating valves. The pipes can after that be buried into the wall as well as smudged over to neaten the overall appearance.
Fit the base tray, shower head, and installations.
Connect the major shower control to the pipes that will certainly be providing the water (This may require a female screw string adapter).
Reconnect the water system as well as test the pipes for any kind of leaks, as some may need tightening up.
If you are installing an electrical shower, remember to turn off the power supply before making any type of electric links. When these connections have been made (there should be support within the instruction manual), the power supply can be changed back on.

Changing Water Pressure to Suit Your Shower.

The cold water storage tank can be lifted to a better elevation (in some cases as low as 150mm (6inches)) by fitting a strong wooden assistance beneath it - potentially made up of struts and blockboards. If you choose this alternative, the main as well as circulation pipelines will certainly additionally need to be increased to fulfill the new elevation of the reservoir.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it should be connected into the power supply in order to run.

Piping as well as Water drainage.

It is best to make use of 15mm size supply pipes, and also make the go to the shower as brief and also straight as feasible so regarding keep optimal stress and minimise heat loss. Additionally, by minimising using arm joints for pipeline edges, you can decrease the resistance in the circulation of the supply of water. You can achieve this by bending the pipes rather.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you enjoy reading up on How to Install a Direct-to-Stud Shower Enclosure? Post a review further down. We would be interested to hear your insights about this content. Hoping that you visit us again in the near future. Loved our article? Please share it. Let somebody else check it out. Many thanks for taking the time to read it.

Quote & Schedule